January 2003 Vol. 33 No. 1

 

Dedicated to the preservation of Early Ford V-8’s- - - the way Henry built ‘em, and to having fun!

PSRG News

December 3 Meeting Notes

The meeting was brief with all attention focused on the table full of gifts. Committee chairs held their remarks to a minimum and the Christmas Party ensued after a refreshment break. At the close of the evening Retiring President John Upthegrove thanked all the people who had contributed to make his year a successful one. Incoming President Bill Meade took the gavel from John and advised that the January Board Meeting will be held at 7:30 pm at ld Charf’s home on January 22. ld’s address is 702 17th Ave E, Seattle. 206-329-9492

 

Drawing winners: Dick Jauch operated the lotteries and the following members took home some cash: Ken Stobbe, Ruth Porter, Bill Steil, Pat Foster, John Upthegrove, Carol Scott, Shelly Muir, ld Charf, Gerry Herber, Don McCarthy, and Valerie Warne. The $50 winner was Cliff Winfrey.

January 7 General Meeting: Three Main Items:

1.Carol Sue Woodard will provide opportunities for members to work at our 2003 Swap Meet.

2. Bill Steil and Guy Generaux will put on one of their famous "Mystery Parts" contests with prizes to the winners. You won't want to miss this!

3. Tom Dailey will announce the task selected for his newly conceived WORK PARTY to be held on Saturday January 11.

Page 2

RENEW YOUR PSRG DUES!

A reminder from your membership chairman Guy Generaux: PSRG dues are due! You should have received your dues renewal by mail in early December. Dues must be paid by January 15 in order for YOUR NAME to appear in the 2003 Roster. If you have misplaced your information, call Guy at 206-323-5709. National dues, as always, are paid directly to the National Early Ford V8 Club. If you have any questions about dues or membership, please contact Guy Generaux at 206-323-5709.

 

November Banquet Photos, Courtesy of Bill Hanie

 

Recognition of ( most of ) the 2002 Worker Bees at the November Banquet

 

Participation Award to Alice Inspiration Award to Carol Sue Restoration Award to ld

 

 

Shelly wins the Hook Award Steil wins the Heart award

 

Page 3

------------------------------------------------------------------------------------------------------------------------------------------

WORK PARTY PLANS

At the November Board Meeting, I presented the following proposal to the Board:

I propose to start group work parties to help our members on jobs where 2 or 3 extra hands can be useful for 2 to 6 hours on a Saturday. Jobs such as doing brakes; pulling a rear end, engine or transmission; or maybe just helping with cleanup and a dump run are the size of jobs I have in mind.

I like work parties and I know our membership responds to work after they have been treated to breakfast. I propose to meet regularly, say the second Saturday of each month, at 9:00am at a restaurant where the Club buys breakfast for those members attending. .

After breakfast we will go to some of our members’ places for a work party. I will be the contact person and coordinator responsible to get workers together with members needing some help with work on their cars. I will do this by letting our people know of the program in the newsletter and by making personal contact with people. They can come looking for help or I will look for them.

I will publish the date; time and place for breakfast well ahead of time in the newsletter. I will not schedule jobs that far in advance. I will manage them on a closer to real time basis to be able to respond better to people’s need for help.

I am requesting $1,000 in the 2003 budget to fund this idea. I don’t know if turnout will be large or small, or if members will respond with enough work needs to make it go. But I would like to try it. If it works I think it will build camaraderie and a sense of purpose among those members who participate either as helpers or those being helped. If it doesn’t work as I have proposed, we will enjoy a few breakfasts and then call it off. But I would like to give it a try.

Tom Dailey

The Plan was discussed approved by the Board that night SOOOOOO…….

 

The first work party will be on January 11, 2003. Meet at 9am at the Buzz Inn at Ballinger Terrace. To get there take the 205th St exit off I-5 and go east. Follow Ballinger Way as it curves southeast. The shopping center in which the Buzz Inn is located is on your left. Total distance from I-5 is about ½ mile.

 

Come prepared to work on the car-related task that Tom arranges and announces at the January General Meeting. Dress in work clothes or bring coveralls as you prefer. Also bring a lunch if you want one. Remember: work may be outdoors.

 

I would also appreciate a call from people who are coming to work. I will match workers to jobs at breakfast, but if I have some idea of who might be there I can do a better job of matching people up. I can also ask people to bring certain tools if needed. You don’t need to call me way in advance – Friday night is OK.

 

Let’s give this a try. It could be fun. Thank you all.

TomDailey

425-485-9050

craftedbydailey@seanet.com

Page 4

----------------------------------------------------------------------------------------------------------------------------------------

December 3 Christmas Party

Mariann Mann directed the annual Christmas gift exchange that brought a total of almost 60 gifts to choose from. Carol Sue Woodard had requested we not bring toys and games to the party as in past years but rather cash to assist this year’s Northwest Harvest. An envelope was set out at the party for cash contributions that Carol converted to food certificates to be donated in the name of PSRG.

 

Shelly at the picking table                                         Carol got a plant

 

Dick Brooks got the lantern he wanted                                     " I think it’s a clutch plate"

 

New Pres and his mate, Laurie                            Old Pres and his gift ( we know not what)

 

Page 5

------------------------------------------------------------------------------------------------------------------------

Computer Corner- Volume 2

by Mike Dermond

Welcome back! Here’s more information about hardware. I have been in the "computer business" since long before Personal Computers or PCs were ever invented. I have actually witnessed work being done on an IBM computer that used vacuum tubes. These things drew enormous electrical loads, power cables littering the floor the size of your arm were not uncommon. Today’s PCs actually use very little power and the display screen (monitor) uses the bulk of that. For desktops notice that monitors have their own power cord. Did you know that all PCs use DC power? That cord you plug into the wall goes first into a power supply (transformer) that converts the AC to DC for everything inside the computer. That is why it was relatively easy to make portable or laptop computers—they already only needed DC or battery power.

There has always been confusion over memory and storage. I believe the root of this confusion is that they are measured in the same unit of capacity. Bytes. Nobody talks about bytes anymore, nobody even talks about kilobytes anymore (1000 bytes) the common unit is now Megabytes (or 1million bytes) and Gigabytes (1000 megabytes) and yes, even Terabytes (1000 gigabytes).

Storage of information on your computer is accomplished by writing it to a large capacity "hard disk" which is the primary storage device. Once written here it persists even when the computer is turned off. The capacity of today’s hard drives is measured in Gigabytes, 20 to 40 being the most common.

Memory is the workspace where your computer does its work, sort of like a blackboard in a classroom. 128 to 512 Megabytes is a pretty normal amount of memory these days. Memory is in the form of chips that plug into sockets on the computer’s main (mother) board. This is constantly being written to and erased, thousands of times a second. When you shut the computer down, any information that was in memory disappears as the chip loses power. That is why there is a delay as a computer shuts down, it is writing information out of memory to the hard disk so it won’t be lost. Memory and Storage, two totally different things, but they are measured by the same unit!

Remember the IP address we talked about last time. A website has to be on a server that has an unchanging or Static IP address, otherwise you could never find it a second time. Since static IPs are a finite commodity, ISPs (internet service providers) purchase blocks of them and dole them out of a big pool as needed to their customers. It doesn’t matter whether you are an AOL customer or MSN or any of the others, when you dial up and connect (or connect via DSL or Cable Modem) you get the next available IP to use which allows you to browse the internet. When you disconnect, that number goes back into the pool to be used by someone else. This is what is called a Dynamic IP because it is always changing. Anyone can get a static IP but it is far more expensive and unless have a specific reason for needing one it would be a waste of money.

Next time –application software.

 

Page 6

 

PSRG Marketplace

 

Wanted: Puget Sounds Newsletter Editor: Energetic, resourceful, inventive, reliable and altruistic person for a small task to be performed monthly for one of the premier car clubs in the northwest which has a 33 year history of service to Early Ford V-8 owners and fans. Must be able to put up with reluctant or non existent reporters. Work under pressure to meet mailing deadlines, plus anything else necessary to keep the newsletter coming. Benefits: Unlimited editorial freedom. If interested, contact Bill Meade at 206-789-5534 or Bob Heckel at 425-697-5951

  

 

 

Automobile for Sale: 1934 Ford 4-door sedan V8, original car, runs, needs restoration, $6700, call Bill Steil 206-282-3818

Parts for Sale: Five 6.70-15 Firestone wide whitewall bias-ply tires, originally $600 from Coker Tire, run 5000 miles, $200 for all 5; RH exhaust manifold for 1937-‘41 , $20; LH ’50 8BA head, $20, one 1939 brake drum, $15; two 1951 rear ashtrays, $15 each; ’36 Ford coil &

condenser, $20; set of RH & LH spark plug wire guide assemblies for ’36 Ford, set of standard size ‘32-’39 NOS Ford piston rings, new in box for your memorabilia collection, $25; ’39-’48 Ford and Mercury Shop manual, $25. Call Shelly Muir, 206-725-5003

40 Ford Columbia For Sale: Complete Columbia Overdrive in excellent condition; "bullet proofed" by Dewey Landis; all new controls from D & W; included is a complete 40 rear end with a 4.11 ring & pinion, drive shaft, axles, drums, etc. The Columbia will fit any 37 – 41 Ford or Mercury, but the new controls are specifically for a 40 Standard. $1,600….exactly what I have in it. Norm Larabee, Edmonds, 425-776-2602*

 

Used Parts For Sale: 1935 V8 block, $80; ’37-’39 4 blade fan, passenger, $10; ’42-’48 fan assembly, $45; ’37-’38 pair of brake backing plates complete w/ shoes, $10 Bill Steil, 206-282-3818*

Three Trucks For Sale:

1946 Ford One Ton w/HM wrecker body. Great condition but needs engine overhaul.

1947 Ford 1-1/2 ton w/Ford script 12 stake bed with hoist added. Drive it away. :

1964 DIVCO Milk truck. 300 Ford 6 engine, Ford trans. Duals on rear. Butch 425-481-5584*

Leads and Needs

Tools and Tool Suggestions Wanted

Mike Woodard is the Chairman of the Club Tools Committee and is the custodian of the Club’s tools. For a complete listing of the present tools he holds, visit the new web site at: http://www.efv8psrg.org Mike is looking for a Ford flathead "pick type" valve guide keeper remover and would also like to procure a valve spring tester, both for Club use. He also wants your ideas for tools to seek for our mutual benefit. Contact him by phone at 425-775-4010 or by e-mail at "mcad@aol.com"

Page 7

 

2003 PSRG OFFICERS AND DIRECTORS

PRESIDENT – Bill Meade (206-789-5534) VICE-PRESIDENT Bob Heckel (425-697-5951)

SECRETARY – Alice Dailey ( 206-783-7087) TREASURER – Butch Kent (425-481-5584)

Parliamentarian- Joh Upthegrove ( 206-246-6354)

Red Smith (425-747-4404) Jerry Herber (425-641-8569) Allen Michler ( 425-821-1283 )

Phil Howard ( 425-747-0536) Cliff Winfrey ( 425-483-2511) Bill Templeton( 206-285-8286)

PUGET SOUND REGIONAL GROUP #18 is dedicated to the preservation and restoration of 1932 to 1953 FORD MOTOR COMPANY vehicles. Owning an Early Ford is not a prerequisite to join the club, merely a desire to be around them is sufficient. All Regional members are required to be members of the National parent organization, THE EARLY FORD V-8 CLUB OF AMERICA. This entitles members to receive the bi-monthly V-8 TIMES magazine and participate in the election process of National Board Officers. National individual membership is $30; joint membership is $32 per year; send dues to: Early Ford V-8 Club, P.O. Box 2122, San Leandro, CA 94577-2122. Puget Sounds is a monthly newsletter published by the Puget Sound Regional Chapter. It is a free publication for current members and advertisers and contains calendar information, technical advice, parts exchange data and revues of club sponsored events and outings. General meetings are held at 7:30pm on the first Tuesday of each month at the National Guard Armory, 1600 West Armory Way, Seattle, WA. Board meetings are held the fourth Wednesday of each month (except Nov. & Dec.) at various locations indicated in the newsletter calendar. Annual Regional club dues are $15 for an individual and $20 for couples; send dues to: Guy Genereaux, 2217 Everett Ave. E., Seattle, WA 98102-4139. Correspondence may be directed to Puget Sounds, P.O. Box 12613, Seattle, WA 98111.

2003 Chairpersons

Accessories

Chuck McLeod

Refreshments

Carol Scott/Bill Haynie

Advertising

Guy Generaux

Restoration Tips

Dick Flynn

Awards (Club)

Steve Henry

Rosters

Guy Generaux

Editor

Open

Summer Picnic

Chuck McLeod

Fall Banquet

Cyndi & John Upthegrove

Sunshine

Shelly Muir

Ford Picnic

Garth MacDonald

Swap Meet

Pete Lowman & Carol Sue Woodard

Historian

Rick Mann

Tools ( Club Property)

Mike Woodard

Librarian

Rick Mann

Tours

The Dailey’s & Gary Duff

Membership

Guy Generaux

Tour of the Year

Guy Generaux

Program

Open

WCCC Rep.

Rick Mann

Raffle

Dick Jauch

Welcome

Guy Generaux

Awards (Banquet)

Open

V8 Times Writer

Paula Ordonez

Auto Advisors

Bruce Goodrich

   

 

PSRG AUTO ADVISORS

Year Make Advisor Phone No. Year Make Advisor Phone No.

1932 Ford Bill Steil 206 282-3818 1946 Ford Open_

1933 Ford Bill Steil 206 282-3818 1947/48 Ford Bob Porter 206 824-8484

1934 Ford Bill Steil 206 282-3818 1949 Ford Ron Buske 425 868-4654

1935 Ford Dick Foster 360 683-6519 1950 Ford Bruce Goodrich 206 284-0771

1936 Ford Leon Sherlock 206 243-8997 1951 Ford Glen Geithman 425 255-1799

1937 Ford Ron Buske 425 868-4654 1952/53 Ford Pete Lowman & 425 481-2088

1938 Ford Ron Buske 425 868-4654 Tom Dailey 425 455-9050

1939 Ford Open 1941 Merc Bill Steil 206 282-3818

1940 Ford Gary Duff 206 284-1613 1949/51 Merc Paul Field 206 383-8275

1941 Ford Dewey Landis 206 367-3239 Bruce Goodrich 206 284-0771

1942 Ford Dewey Landis 206 367-3239 1953 Merc Jim Hendry. 425 228-1539

 

Back page

 

 

Note to Automobile Clubs in the Pacific Northwest Area. We will try to include your club event announcements in our newsletter when we can. We need to receive them as early as possible to help assure publication.

Note to advertisers: We will run your ad for only 2 months unless you ask us to repeat it.

All "Wanted "& "For Sale" ads shall normally be somehow related to our Club purpose of promoting the restoration, preservation and utilization of Early Ford cars & trucks with limited exceptions decided upon by the Editor in his wisdom.

Any advertisement of a product, car meet, etc by a commercial entity will be run only once at most, unless our standard advertising fees are paid. Contact Guy Generaux for rates.